CKMRB - ACCESS MYOGLOBIN DILUENT, 33316
- MSDS: CKMRB
- Manufacturer: BECKMAN INSTRUMENTS INC
- Product Name: ACCESS MYOGLOBIN DILUENT, 33316
- National Stock Number: -
Product Identification
Product ID:ACCESS MYOGLOBIN DILUENT, 33316
MSDS Date:11/17/1997
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CKMRB
Responsible Party
CHASKA, MN 55318-1084
US
Emergency Phone: 800-854-3633
Info Phone: (612) 448-4848
Cage: TO606
Contractor
Telephone: 800-666-7111; 612-448-4848
Cage: 0TEN9
Ingredients
BOVINE SERUM ALBUMIN (BSA)
CAS: 9048-46-8
MISC. INORGANIC SALT. (I.E. NA2HPO4, NAH2PO4)
WATER. H2O
CAS: 7732-18-5
RTECS: ZC0110000
SODIUM AZIDE. NAN3
CAS: 26628-22-8
RTECS: VY8050000
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:LD50 (RAT ORAL): 27 MG/KG (SODIUM AZIDE)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:[BOVINE SERUM ALBUMIN]-POTNTLY
INFECTIOUS MATL IF SKIN IS PENETRATED AND/OR MUC MEMB ARE EXPOSED.
[MISC. INORGANIC SALT] MAY CAUSE TEMP EYE, SKIN & UPPER RESP TRACT
IRRIT. [SODIUM AZIDE]-IS A HIGHLY P OISONOUS AGENT. MAY CAUSE EYE,
SKIN & TISS IRRIT IF SPLASHED, SPILLED ON BODY OR INGESTED. MAY BE
FATAL IF INGESTED OR INJECTED IN QTYS ABOVE THOSE FOUND IN THE
REAGENT. [WATER]-NOT APPLICABLE.
Effects of Overexposure:MAY INCLUDE: HEADACHE, RESPIRATORY CONGESTION
AND EYE IRRITATION. SKIN CONTACT MAY RESULT IN DERMATITIS.
First Aid
First Aid:EYE CONTACT: FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST
15 MIN, ENSURING ADEQUATE FLUSHING BY SEPARATING EYELIDS WITH
FINGERS. SKIN CONTACT: REMOVE CONTAM CLOTHING. WASH & RINSE
AFFECTED AREA(S) THOROUGHLY WITH SOAP & WATER. MAY CAUSE ALLERGIC
SKIN REACTIONS. SWALLOWING: WASH OUT MOUTH WITH WATER. INHALATION:
REMOVE FROM EXPOSURE AREA TO FRESH AIR.
Fire Fighting
Extinguishing Media:WATER, CO*2, DRY CHEMICAL OR ALCOHOL FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN.
Unusual Fire/Explosion Hazard:COMBUSTION PRODUCTS: NOT FLAMMABLE
(EXCEPT PACKAGING MATERIALS).
Accidental Release
Spill Release Procedures:CLEANUP WITH ABSORB MATL & APPROP
DISINFECTANT. ABSORB & PLACE IN SUITABLE WASTE CONTAIN. SWEEP UP
SOLIDS & PLACE IN SUITABLE WASTE CONTAINER. USE UNIVERSAL
PRECAUTIONS & GOOD CLINICAL LAB PRACTICES. AVOID DIRECT CONTACT
W/MATL BY WEARING APPROP PERSONAL PROTECTIVE EQUIP SUCH AS GLOVES,
FACESHIELD, LAB COAT, ETC.
Handling
Handling and Storage Precautions:HANDLING: FOLLOW PROPER LAB SAFETY
GUIDELINES FOR CHEMICALS & BIOLOGICALS. WEAR GLOVES TO PREVENT SKIN
CONTACT. AVOID SPLASHING OR GENERATION OF AEROSOLS. HANDLE AS
POTNTLY INFECTIOUS MATLS IAW LOCAL, STATE & FEDERAL REGS. STORING:
STORE AT 2-10C.
Other Precautions:REFER TO ASSAY MANUAL FOR PRODUCT INSERT FOR
ADDITIONAL PRODUCT INFORMATION. REFER TO CHEMICAL SPECIFIC MSDS
FOR ADDITIONAL DATA.
Exposure Controls
Respiratory Protection:A NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THE
EXPOSURE OF CONCERN .
Ventilation:NORMAL LAB VENTILATION IS ADEQUATE UNLESS AEROSOLS ARE
GENERATED--IF SO, CONSULT WITH YOUR SAFETY AND ENVIRONMENTAL HEALTH
OFFICER.
Protective Gloves:APPROPRIATE TO PREVENT SKIN CONTACT. WASH HANDS
THOROUGHLY AFTER REMOVING GLOVE
Eye Protection:ANSI-APPROVED CHEMICAL SAFETY GOGGLES & FULL FACESHIELD
.
Other Protective Equipment:EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA . PROTECTIVE CLOTHING: LAB COAT OR GOWN TO PREVENT SKIN
CONTACT.
Supplemental Safety and Health
Chemical Properties
pH:5-9
Solubility in Water:YES
Appearance and Odor:LIQUID IN GLASS VIALS. ODOR: NONE.
Stability
Stability Indicator/Materials to Avoid:NO
SODIUM AZIDE MAY REACT WITH LEAD AND COPPER PLUMBING TO FORM HIGHLY
EXPLOSIVE METAL AZIDES.
Stability Condition to Avoid:REACTIVITY: NOT APPLICABLE.
Disposal
Waste Disposal Methods:DISPOSE OF MATERIAL IAW LOCAL, STATE & FEDERAL
REGULATIONS. CONTACT YOUR SAFETY AND ENVIRONMENTAL HEALTH OFFICER
FOR DISPOSAL PROCEDURES. ON DISPOSAL, FLUSH WITH A LARGE VOLUME OF
WATER TO PREVENT AZI DE BUILDUP.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.